Details for this torrent 


SolidWorks 2010
Type:
Applications > Windows
Files:
15
Size:
10.17 GB

Tag(s):
SW2010 solidworks SolidWorks
Quality:
+21 / -2 (+19)

Uploaded:
Dec 7, 2009
By:
Anonymous

Seeders:
74
Leechers:
20
Comments:
165


SolidWorks 2010

Både för x86 och x64 windows system.. Funkar med W7.
Multilanguage.

Cracks och serial finns med torrenten...



It is for x86 and x64 windows systems.. Works with W7
Cracks and serials is in the torrent.




Lycka till/Good Luck

Comments

greythorne at 2009-12-07 14:52 CET:

ARE YOU SEEDING OR WHAT!!!!!

eurohunk2 at 2009-12-16 20:08 CET:

So is this the real deal or what I don't see any comments confirming it.

Netopnu at 2009-12-16 20:31 CET:

Hi, can anyone tell if this works!?

bullemina at 2009-12-16 21:25 CET:

It Works!

snipes684 at 2009-12-17 17:41 CET:

Can anyone show what is included in this torrent? (Photoview, Simulation, design studies, etc.)

argan at 2009-12-17 18:42 CET:

hi there, i can't use the serial. Solidworks can not find this serial in their database so it will not install. anyone got a solution for this?

argan at 2009-12-17 18:46 CET:

btw, it looks very much like the real deal 2me with Photoview etc..

engruss at 2009-12-18 14:45 CET:

Got it installed and working except for two problems:

swexplorer2pdmworks_crk.exe makes my antivirus, Avira, complain that it
contains DR/Delphi.Gen. Even so, running it in the ,
it says that it failed to update file. Using Windows 7 64 bit. Tried running
swexplorer2pdmworks_crk.exe in compatibility and administrator mode with no
sucess.

Simulation is installed but says that "No license exists for Solidworks
Simulation. Would you like to run the Activation Wizard?", the simulation
runs. Maybe this is a trial license?

I set up a seperate partition on my machine with a fresh software load, just to run this version Solidworks.

Thanks otherwise. This is great.

Please let me know if you have any suggestions on the above.

argan at 2009-12-19 15:28 CET:

please anyone, what do i do when the serial doesn't work?? Anyone has a working serial for me...?

Dan9111 at 2009-12-25 16:52 CET:

Working 100% on XP pro

Argan, I disconnected from internet and serial provided worked fine.

Engruss, AVG didn't detect anything and swexplorer2pdmworks patched fine. Also try putting license. dat in your Cosmo license folder to fix Simulation problem.

Great upload,

THANKS!!!!

jus2sho at 2009-12-26 00:58 CET:

I'm having trouble finding the right folder to copy file swexplorer2pdmworks_crk into. I've tried copying into the suggested folders "SolidWorks Explorer" and none of them work. WTF! Can someone tell me which is the right folder?

Dan9111 at 2009-12-26 15:30 CET:

C:\Program Files\SolidWorks Corp\SolidWorks Explorer\SolidWorks Explorer 2010

Once in folder run and should get patch successful

ForFun00 at 2009-12-27 06:05 CET:

Anonymous, Thanks a lot!
My installing learned experience w/SW2006, 7, 8 & 2009, is that I 'always' disconnect NTERNET; The installation will ask you to connect, 'click' CANCEL, a few times, until the installation starts.
Hope this helps.
I never perform an INSTALLATION 'unless' I'm 100% sure internet is disconnected.
Sometimes firewalls fails, and we may loose a good serial.

Watatsumi at 2009-12-27 20:34 CET:

the modified dlls only work with sp0.0 but not with sp1.0 :(

i installed the clean sp0.0, applied the 2010 service pack 1.0 and then tried replacing the dlls. SW crashed right from the start :(

Anyone has patched dlls for sp1 or an universal patcher utility like the one that worked for sw2007 all patch levels?

JWA99 at 2009-12-31 05:36 CET:

Where to copy this... Copy "sldappu.dll" to and overwrite original one

In Windows 7 Ultimate, Thanks for the help.

argan at 2009-12-31 20:19 CET:

Dan911 I did disconnect but when it installs without internetconnection it will only install certain parts and not the full version....i'm still hoping someone has a solution

fizz654 at 2010-01-06 02:17 CET:

SolidWorks come up fine. But after creating a part, I only see the Tools, Simulation Xpress menu. I applied all the overlay files. How does one get the advanced Simulation package that is installed? After copying the license.dat into Simulation folder, what then?

dieterlives at 2010-01-06 04:15 CET:

I am trying to install this on Windows 7 (64-bit).
So I mount the SW2010 win64 disk image using PowerISO, but when I try to open 'sldim.exe', it doesn't seem to do anything... The first time, it immediately asked me whether 'the program had installed correctly?', so I chose 'reinstall using recommended settings', which didn't seem to do anything either. I've tried using the 'run as administrator' option in the context menu, and even several compatibility modes, but nothing seems to happen when I double click the installer...
Has anyone else run into this problem?

fizz654 at 2010-01-06 04:55 CET:

My install must be different. If I click the part (right or left click), there is no Office Materials selection. Nor is there an Office Materials select anywhere else.

336616 at 2010-01-06 16:32 CET:

I got everything working fine, except the actual solidworks program won't open. It just says
"Could not obtain a license for SolidWorks Standard.

Cannot find license file.
(-1,359,2)"

What did I do wrong?

bensinskalle at 2010-01-07 12:33 CET:

Wonderful upload, big thanks! I've managed to get the program to work and I'm not a computer geek so it shouldn't be any problem

It is the real deal ;)

I'll be seeding

AchillesGr at 2010-01-08 09:08 CET:

guys,
my antivirus sayes that there is a vorus at the explorer patch . exe file.
what is wrong?
thanks

ataolah at 2010-01-08 11:17 CET:

thanks

tomilynn at 2010-01-08 19:09 CET:

Be advised, I also get a warning from avast virus protection that SWExplorerer2pdmworks_crk.exe has a worm virus. Any thoughts?

mrgefilus at 2010-01-09 19:41 CET:

SolidWorks Simulation Premium anyone?? Does alot more than this one...

fizz654 at 2010-01-10 08:58 CET:

Finally figured out how to enable Simulation. I'd used only Simulation Xpress in a class prior. By going to,
Tools, Add-ins, select Simulation, I finally got the Simulation menu selection in the top menu bar. Kind of like learning to walk, no one could help, so for other noooobies ... Now I can run Simulation, and even see the Help, Simulation Tutorials option, which had not been there earlier. THANKS from an unemployed FEA guy, in case the next job opening requires SW FEA!

h1jeff at 2010-01-14 22:47 CET:

y is this solidworks 2009?????its not 2010, tell me Y please

bmcjames at 2010-01-15 08:46 CET:

It is 2010 version and it is working just fine on my Windows 7 64 bit version.

I cant seem to figure out how to install the full Flow Simulation all I have is FlowExpress which is really holding me back from what I need to do with it. If anyone would be willing to help me out a bit I would be very appreciative...

fbhsrainman at 2010-01-17 19:38 CET:

Thanks for the uploads. Works perfectly, and haven't had any issues with it.
Thanks for the upload whoever you are.

Mikey_AX_SWE at 2010-01-20 17:24 CET:

Hejsan!
Jag får inte programet att funger måste man bräna det på en skiva först eller använda deementool eller något liknande????
Jag väljer Individual (on this computer)
fyller i cdkey. Sen när jag trycker nästa står det.
A serial number was not found in the activation database: SolidWorks. If your license is new, you may want to try again later. Otherwise contact your reseller to verify that the number is correct. You will still be able to choose the products you want to install, but you will not be able to download any installation files. If you continue without downloading enabled, you will need to provide a complete set of download source files or a DVD from which to install.

Vad är det för fel??

mpardakokefalos at 2010-01-20 18:17 CET:

I can't find the serial number. Can you help me please?

halafax92342 at 2010-01-26 06:56 CET:

I can't get it to open after I install it just as directed. It shows the splash screen then says "an error has occurred and solidworks needs to restart" but it won't get passed that. I am running win XP 32bit. Any ideas? Please help.

halafax92342 at 2010-01-26 07:05 CET:

Serial is in the root directory>solidsquad>solidworks>win 32 or 64>readme.txt

halafax92342 at 2010-01-27 08:33 CET:

if anyone actually gets this to work on a win 32 system please post a comment and tell me how. or I'll stop seeding;)

ForFun00 at 2010-01-28 19:26 CET:

To mjstewar comment at 2010-01-07 04:21 CET:

Your POSTED LINK" (TO THOSE OF YOU WHO WANT **SIMULATION** TO *WORK PROPERLY*) http://thepiratebay.ee/torrent/5264268 Doesn't work.
Can you revise it?
thanks

s2951 at 2010-02-01 05:15 CET:

This is 2010 real deal. Works well on my Windows 7 Ultimate x64, thanks!

digitalc at 2010-02-03 07:05 CET:

Got this working on WinXP Pro SP2 32 bit edition. Sim works fine, however it is only Sim Pro, not Sim Premium which I need. Anyone know how to unlock that?

goertz84 at 2010-02-09 16:14 CET:

Just a newbie and logged in but cant seem to download this program how do you do this I try to download it and the file is only 52.2 KB any ideas would be helpful Thanks

sanmarcoveneto at 2010-02-09 22:42 CET:

I have installed the program without any problems. The only file I?m missing is the cracked ?license.dat? to be able to run the Photoview 360. If anyone has it, could you please post it? Thanks.

T1mBo_73 at 2010-02-18 21:37 CET:

??????? ???????? ?????? ??? ????????

assman84 at 2010-02-28 05:02 CET:

Everything works except NONLINEAR analysis. I get "Security device is not responding". Assuming that the license does not support advanced simulation functions.

Has anyone else been able to get it to work?

MaCharSista at 2010-02-28 13:40 CET:

I cant find these files: nexus4.dll, license.dat and swexplorer2pdmworks_crk.exe

they seem pretty crucial to the installation, where are they?

MaCharSista at 2010-02-28 13:42 CET:

SW2010 is awesome btw, great upload!

MaCharSista at 2010-02-28 14:18 CET:

oh, I had lost the crack, of course the files where there

EzekielAngel at 2010-03-05 08:24 CET:

Hey Can U Help.. I Think The Keys May Have Been Blacklisted.. I Mounted And Everything Is Going Fine But When I Put In The Serial It Says Quote : A serial number was not found in the activation database: SolidWorks. If your license is new, you may want to try again later. Otherwise contact your reseller to verify that the number is correct. You will still be able to choose the products you want to install, but you will not be able to download any installation files. If you continue without downloading enabled, you will need to provide a complete set of download source files or a DVD from which to install.

Click Back to check the serial number you entered or enter a new serial number. If you continue without a validated serial number, the Installation Manager will not pre-select the products to which you are entitled.


If Indeed The Serials Are BlackListed, And U Have Some More Can U Please Email Them 2 Me At NolenUmar@gmail.com , Or If Im Just Makin Some Stupid Noobish Mistake Can U Please Tell Me. Anyways This Is A Great Torrent, It's Value Is Very High. Download Speed For Me Was About 1MB Throughout. Thanx "Anonymous", Lol.

kukkurik at 2010-03-08 17:42 CET:

seed pls!!!!!

jedad8822 at 2010-03-08 20:06 CET:

@EzekielAngel
The reason why you got the message was because you installed the software while connected to the internenet. It has to be done while disconnected.

Has anyone got solidworks simulation fully working?
It starts up fine and creates a mesh, but when it runs a study this message comes up and forces you to cancel.
"Security device is not responding.
Please install security device".

Any help would be really appreciated.

Thanks

kukkurik at 2010-03-08 20:47 CET:

Thanks

Maurosso at 2010-03-11 11:08 CET:

Simulation does work splendid!!
Just use all the cracks from the RAR archive!! There are some missing in the folders!, After full install and crack apply, goto Tools->addons, and activate(!!) simulation, and it works like a charm

jedad8822 at 2010-03-12 16:16 CET:

@Maurosso
Thanks for confirming that simulation worked for you.
Did you install the 64 bit version?
I installed the 32bit version and I still cant get the simulations to run without the error message.
Anyone else having this problem?

AAsylum at 2010-03-13 05:34 CET:

Simulation works but only for static studies. This is just the basic simulation package that is included with Solidworks Premium.

Does anyone know where I can get SolidWorks Simulation Premium and Flow Simulation?

henbononi at 2010-03-15 13:33 CET:

I cant open the setup and sldim.exe. I click and nothing happen. Any ideias ???

Maurosso at 2010-03-15 18:14 CET:

Hm, i installed the 32bit version. And have not only static, but 6 different sim types (dunno what are their real names in english as i'm not using it as the products laguage but here goes: Static, Frequency, buckling, Termic, fatigue, Pressure tank construction) Plus you have COSMOS M included if you need more.

@jedad8822 -> Did you try to simply reinstall the whole package? I ruined my instlation with a faulty service pack, and a full reinstal fixed all the problems.

Maurosso at 2010-03-17 00:05 CET:

@Maurosso -> You sir, are stupid, and don't listen to other people :(

Sry, you were right, most of the Simulations request a security device...BUT, I have found a full working SOLUTION!!
-
http://www.torrent2crazy.com/torrent/7809270/solidworks-2010-simulation-new-license-file
-
In short:
1. goto: http://files.me.com/mark.j.stewart/ta630i
2. Use ''thankyou'' as the password
3. Follow insctuctions in the rar.

Now everything works!!

flapman at 2010-03-18 13:31 CET:

Can´t find original sldutu.dll for Solid works there is a sldwinshellextu.dll only in the folder

13791113 at 2010-03-25 23:40 CET:

I have the same problem as @henbononi
I click on sldim.exe and nothing happens.
I am on win 7, 64bit and I did burn the image on a multilayer DVD. Anyhelp?

Sprookjesverteller at 2010-04-18 01:59 CET:

For those having trouble with the patching procedure (i.e. placing & executing the "swexplorer2pdmworks_crk.exe"-file), note that:
if you use Vista, please make sure you execute the exe-file as "Administrator". Hope this helps, definitely solved our problems. :)

wordsowisdom at 2010-04-27 04:58 CET:

Hey, which file folder is the serial in after you mount the image?

MoonDookie at 2010-05-04 21:03 CET:

@Maurosso
I can't get the license.dat file to authorize, it gets an error about unable to open the file.
help

nirvana1921978 at 2010-05-06 11:54 CET:

It's working .Thank a lot.

FtblCmdr at 2010-05-07 03:54 CET:

64bit install says not compatible with 64 bit system

jowjowjow at 2010-05-08 14:53 CET:

not working, waste of time! !@$!@#%$@#%^@^&&*%#

blackpearl4u at 2010-05-08 17:52 CET:

ALERT:
Norton 360 - 2010 flagged the following:
Trojan
High
This file risk is high.
____________________________
Threat Details
Programs that infect other programs, files, or areas of a computer by inserting themselves or attaching themselves to that medium.

Source
swexplorer2pdmworks_crk.exe
____________________________
File Actions
File: c:\documents and settings\my documents\azureus downloads\solidworks 2010 sp0.0 64bit - by solidsquad\sw2k10sp0.0_cracks\solidsquad\swexplorer\swexplorer2pdmworks_crk.exe
Blocked
____________________________
File Thumbprint:
5e1954e285080ff0b22b69732d9ce50d79f043eff458b29dfdff301ca94ccbf8
____________________________

pupuhd at 2010-05-10 18:23 CET:

Excellent, thank you.

gharryh at 2010-05-12 22:42 CET:

I cant install it. The license is out of date.
I am during install not connected to the Net.
Please advice

MoonDookie at 2010-05-13 02:03 CET:

it would be nice to get that lic.dat file ,
the one from the link adobe is not working, it errors out no matter what i do.
any other solutions?
thanks for the great upload, if only we could get some help...: )

sw2010 at 2010-05-13 03:35 CET:

hi, is there a virus in the swexplorer2pdmworks_crk.exe file? or should i just turn my norton off?
thanks

adrianeric at 2010-05-24 02:51 CET:

Can someone please inform me of the order of files that need to be executed to get SolidWorks up and running?

I tried to execute the SP0 Setup Wizard, but I keep getting an error saying, "The Wizard was interrupted before the SolidWorks 2010 SP0 could be completely installed."

sexy13beast at 2010-05-30 01:29 CET:

I got it installed and everything seems fine until I click a face to draw on. It centres, then freezes. The only thing I can do is ctrl+alt+del to close it. It even covers my desktop. I input the serial offline, cracked it and I'm pretty sure I did everything properly. If anyone can help, I'd be very appreciative.

vrnmhjn at 2010-06-16 16:23 CET:

nice work dude...it works fine

physics07 at 2010-06-22 06:44 CET:

Simulation security device not working.

I did what maruso said to no avail. I noticed that the license.dat file is the same one used for the SolidWorks 2009 torrent. I put the license.dat file in
C:\Program Files\SolidWorks Corp\SolidWorks\Simulation\License
but no luck.
Also ran the LicenseAdmin program too.

Can anyone please specify more detailed instructions. Personally need thermal analysis badly. Thank you very much in advance.

guitarmasterlala at 2010-06-28 08:10 CET:

I did everything as instructed, i can get simulation but the problem is it will expire in 30 days. How do i get the it to last longer, i have cleaned out registry and reinstalled twice

guitarmasterlala at 2010-06-30 03:58 CET:

Hi guys,

Is there anyway i can overcome this problem without having to reformat my harddisk?

Anyway? do you all face the 30day trial problem or is it only just me?

I have a registry program, but i don't know which is the solidworks trial key. if anybody can give me the name of the file i can go reset it. thank you for your help

guitarmasterlala at 2010-06-30 07:15 CET:

Hi, can anyone help?

How would i get rid of the 30 day activation period in solidworks 2010. I can find the autocad timelock in the registry but not the solid works, i have no idea which belongs to solidworks.

If anyone installed the solidworks 2010 application, do you have 30 days? or did you get a longer time period. thank you for your help

Engma at 2010-07-01 05:03 CET:

Follow directions people, take your time.

32-bit version installed, everything seems to be 100% operational.

sexy13beast at 2010-07-07 05:08 CET:

Dudes, so sorry. I uninstalled and reinstalled and it worked. I guess it connected somehow before I could tell my firewall to block it. Thank you SO much for the program! Worked with it in school and needed a home version to keep up due to absences from a medical issue. And thanks to all for supporting the site!

solidwok at 2010-07-14 21:15 CET:

After trying to install for a one full day, I finally got all the cosmos and flow simulation working (the real flow simulation, not the flowexpress).nThis is how, at the start of installation, at the \"select product\" screen (3rd screen), click on \"change\" the product to be installed. By default flow simulation is unchecked. Make sure you check/tick flow simulation and all everything else.nAfter the installation completed, go to \"solidworks corp\" directory in your program files, you will see the flow simulation directory. Follow the patch instructions in the patch EXCEPT for license.dat. Paste the license.dat from the crack into the flow simulation/license folder. Then open the LicenseAdmin to check if you have the license Authorise \"pass\". If not, click on the configure license and browse to the license.dat and click OK. It should work. If it don\'t, the use the license.dat from Mjstewar.nHave respect for Solidworks, buy a genuine copy if you make enough of money.n

dkinn02 at 2010-07-15 01:43 CET:

Well I\'ve been at this for 2-3 days. Win XP and AVG. Easy to install and apply the patches, however, it seems only good for one shot. After getting to play with it for a little bit, it refuses to start afterward. I get to see the splash though it refuses, tried only loading the file when internet was unplugged. Uninstall, +deleting the registry keys seems to work, though only for another fresh install and 1 run. Have yet to figure out how to get a permanent fix for this. Anyone else with similar issue and resolution?

vishnukrs at 2010-07-16 07:08 CET:

where is the instructions? pls some one help...

cadvi at 2010-07-16 12:36 CET:

Hello,rnrnTo all Every thing is working. Would any body tell me how to activate \' NON-Linear Simulation \' portion of Solidworks simulation?rnrnI am looking to activate solidworks simulation premium ( Non linaer portion)rnrnrn

tekniks12 at 2010-07-21 06:14 CET:

Works great! Don't bother burning dvd's, just mount the image with magic-ISO. If you need instructions go buy the real thing.

Tapemeasure at 2010-07-21 14:46 CET:

Any luck with applying service packs? With SP3, SW hangs after a couple of minutes for me.

sam1984_12 at 2010-07-21 18:58 CET:

hi i installed SW but it is not opening now and showing message ''could not obtain a licence for solid work standard , cannot find licence file'' , moreover during installation a window prompted for To add a server name but there is nothing like server name in cracking folder. please help me.

sam1984_12 at 2010-07-21 19:05 CET:

hi i installed SW but it is not opening now and showing message ''could not obtain a license for solid work standard , cannot find license file'' , moreover during installation a window prompted for To add a server name but there is nothing like server name in cracking folder. please help me.

scoot9 at 2010-07-24 18:08 CET:

Hello everyone. come someone help me. I always think it's risky to download any from an Anonymous person. I'm using AVG now and it's showing 2 viruses in the crack. I use to use Kaspersay and it would reconize cracks not to be a virus but I'm not sure about AVG. can some one tell me if you had any issues with this.

scoot9 at 2010-07-24 18:18 CET:

my last message got deleted ?

Kakawko at 2010-08-02 17:25 CET:

Key doesn't work!

bdkmac at 2010-08-04 13:04 CET:

Anyone install this on Windows 7?
I am trying to install this on Windows 7 professional 64-bit. When I click the .exe file, it asks if I want to allow this program to make changes to my computer. Then it does nothing.

bdkmac at 2010-08-06 00:57 CET:

dieterlives, henbononi, and 13791113 have all had the same problem as me. Did any of you find a solution?
I am running window 7 professional x64. When attempting to install Solidworks, I mounted the iso file to drive G with powerIso. after exploring the disk, I double clicked setup.exe. I window popped up asking for permission to make changes to my computer. After I click yes, nothing happens. I attempted installing both the x64 as well as the x32 edition, and I get the same results with either one.

bdkmac at 2010-08-18 01:06 CET:

The 32 bit version installs perfectly on my XP machine, but still no luck on 64 bit windows 7. I went into the folder labled swwi, then data, then double-clicked setup. The installer began to run (previously it clicking on the setup in the main folder yielded no results). After a while the installer fails, with an error message reading:
Error 1311.Source file not found: G:\swwi\winnt0.cab. Verify that the file exists and that you can access it. Clicking retry just brings back the same message. Can someone who has successfully installed this on windows 7 please help me?

enterthekato at 2010-08-21 20:28 CET:

I ran the setup.exe in the swwi/data folder, entered the serial and followed the steps all in offline mode until it said it installed successfully, and replaced the sldappu.dll file in C:\Program Files\Solidworks, but when I run solidworks it states that "This operating system is not presently configured to run this application." How do I fix this? I'm running Windows Xp 32-bit system on my macbook.

davids495 at 2010-09-02 17:23 CET:

I am having the same issue as DKINN02. The installation of Win32 solidworks went smoothly. After completion, I opened and used the program. Since then, when I try to run the program, it shows the initial splash screen for five seconds. This then goes away and the program stops loading. Operation of the computer is normal before, after and during the load attempts. I know many of you have been able to use this torrent successfully. Any ideas on what we are doing wrong? I am member davids495. Thanks

knockout1 at 2010-09-03 13:52 CET:

So is the crack clean or infected? Kaspersky found 4 troijans and deleted them. Can't they really make some clean cracks ?

Crazy_Swiper at 2010-09-12 14:29 CET:

I do not know where to copy sldutu.dll on windows 7. Because there is no other sldutu.dll file in local C
where is SW2010 is install, i have copy and patch everything but can't finde where is sludut.dll and overwrite it. hlp pls???????????

Crazy_Swiper at 2010-09-12 14:37 CET:

NP, i have solve it some how

imacpro1011 at 2010-09-18 18:14 CET:

After installing this I started receiving strange emails, and even starting seeing failed outbox messages that were about "Pharmacy.com" stuff. After doing a sweep with new virus software a backdoor trojan was found.

Backdoor.win32.Hupigon.Kzad in the file \Program Files(x86)\solidworks corp\solidworks explorer\solidworks explorer 2010\swxhelper.dll

imacpro1011 at 2010-09-18 18:54 CET:

I don't want you to think I'm an ungrateful bastard, I thank you for the upload. Just keep the viruses off

http://www.flickr.com/photos/soloeyesteve/5001758664/

Datahead2007 at 2010-09-22 19:50 CET:

Program install perfect... Only thing is that there was a Win32 Malware Virus attached executible file in the SW Explorer Crack folder. Might want to check that out. Other than that the software seens to be running great.

PS: Win 32 install

unavis33 at 2010-09-24 02:16 CET:

how do u pass the connexion request...
i m offline i mount on dameontools i go sldim.exe
past the serial then wait for connexion either from internet or server ..
nothing happend

DonnieBrasco87 at 2010-10-12 14:24 CET:

Hi all. I have some problem with instalation manager. When i press next, cancel or help nothing it hapens. My OS is W7. Anyone can help ??

kevinarnold021692 at 2010-10-20 04:47 CET:

help please i don't know how to down load solid works spent 2 days downloading
what do i do really just at the moment need solid works
what program if any do i need to download it

kevinarnold021692 at 2010-10-22 00:11 CET:

where is the simulation installer i can't find it anywhere

TCEA at 2010-11-03 13:59 CET:

Watch out!!!!
This torrent contains a Trojan!
Name: Generic.dx!tav

tlhull1 at 2010-11-16 15:47 CET:

A little help guys,

I installed, following all the directions with my antivirus disabled and no connection to the net. Copied and pasted all the appropriate crack files with the exception of the solidworks explorer executeable which did not go properly. It gave me an error that said "Error patching file" after I was done the program started up to the splash screen and then locked up using about 24% of my cpu. While the splash screen was still up I tried again to open it and it works fine. All that said there are now two instances running and I am actually able to close the first one down and the second runs without a hitch. Any ideas?

alain.aoun at 2010-11-20 18:57 CET:

Seed Pleaassseeeeeeeeeeeeeeeeeee!

ebombers at 2010-11-21 23:17 CET:

Be warned,

AVG says this torrent cotains the backdoor.hupigon 5 trojan, twice!!

You don't want that one!!

DTSFM at 2010-11-23 21:06 CET:

Hello All

I downloaded this torrent but I am having some install trouble. After the download finished, I run the 32 bit install setup. My first hiccup is when it asks to enter the serial. The serial that was in the text file does not work with the software (as other users have previously stated). I decided to continue install without entering a serial. Everything else runs smoothly, except that when all is said and done, there is no Solidworks program. The only 2 new items are the e-drawing viewer and solidworks explorer. I cannot find the program anywhere...

Is this because i neglected to input a valid serial?? If this is the case, could someone provide input as to why the serial is not working and/or a valid way of getting it to work?

If someone could offer come advice, it would be much appreciated. I am running 32 bit Windows 7 in parallels on my Mac and would love to get this working.

Thanks!

vandal4life at 2010-11-24 20:24 CET:

on the summary page of the install it says that i do not have a toolbox location selected but it does not need one. then when i try to continue with the install it won't let me go any farther because the toolbox location is not found and it needs to be repaired? any help?

jackwilliamwillard at 2010-12-10 03:05 CET:

Every thing works fine except cosmos and simulation.

When I try to open or create a new file I get (2) error messages:

"The specified procedure could not be found"

and

"Could not load SolidWorks DLL: sldanimateu.dll."

Has anyone else had this problem? and Do you know how to fix?

Thank you in advance for your anticipated response.

jackwilliamwillard at 2010-12-10 03:42 CET:

works

jackwilliamwillard at 2010-12-10 18:28 CET:

Can anyone help?
Every thing works fine except cosmos and simulation.

When I try to open or create a new file I get (2) error messages:

"The specified procedure could not be found"
and
"Could not load SolidWorks DLL: sldanimateu.dll."
Has anyone else had this problem? and Do you know how to fix?

I am using Vista 32bit
Thank you in advance for your anticipated response.

bfoot343 at 2010-12-16 17:38 CET:

work in vista 32bit?

ty

RudiGj at 2010-12-23 21:32 CET:

Can anyone help me? I cant find the serial key for SolidWorks

RudiGj at 2010-12-23 21:33 CET:

Where do you find the serial key?

RadarB8 at 2010-12-26 02:46 CET:

"A serial number was not found in the activation database: SolidWorks"

Is the serial 0001 0001 0736 0361 JK3Q HDJ3 now outdated or what?

Destavoult at 2010-12-26 03:49 CET:

@TCEA The 'Trojan' is the crack for this porgram. Norton 360 gives a messege too.
Just calm down, it's just the crack. If you download other programs from this site you'll notice that there will be more trojans (crack for programs)

javaidrana1 at 2011-01-03 08:07 CET:

Hey guys ! does this shitt work or not? Everybody keep talking shit but nobody says if it works or not..?

toroqz at 2011-01-10 08:57 CET:

Same problem as DonnieBrasco. Win XP here.

toroqz at 2011-01-10 09:21 CET:

I have some problem with instalation manager. When i press next, cancel or help nothing it hapens. My OS is W7. Anyone can help ??

sasonando at 2011-01-20 09:39 CET:

does anybody know where i can find service pack 5?

RedMan21 at 2011-01-23 00:52 CET:

I got it to work on Windows 7 Ultimate x64 (so far)

RedMan21 at 2011-01-23 02:16 CET:

I got it to work on Windows 7 Ultimate x64 (so far)

I hope this helps everyone:

0. Extract the sw2k10sp0.0_cracks.rar file
1. I deleted all previous versions of Solidworks, including all folders
2. Disconnect from internet and disable anti virus program
3. Open the contents of the .iso and go to the sldim folder then go open the sldim application
4. Install the product with the serial number (I used the first one in the sw2010_SolidSQUAD file). If it says that you cant install it or you need to be connected to the internet just hit "Cancel" or "Okay" to continue and it should start the installation.
5. After its installed DO NOT START SOLIDWORKS!!!!!! I believe this will ruin the crack and you will have to reinstall it or only use the trial version.
6. Apply the cracks. Go to the folders that appeared after extracting the sw2k10sp0.0_cracks file. Open each folder and it has instructions where to put it. For Windows 7 x64 some of the directories you have to paste the cracks in are located at C:\Program Files (x86)\SolidWorks Corp and some are in C:\Program Files\SolidWorks Corp (See below for more details).For the Solidworks Folder crack it says you need to install it with a different serial. I didnt and it still worked, so if its not working maybe use that.
8. After all this start up Solidworks and it should work. You can reconnect your internet and virus protector afterward.

RedMan21 at 2011-01-23 02:20 CET:

I got it to work on Windows 7 Ultimate x64 (so far)

I hope this helps everyone:

0. Extract the sw2k10sp0.0_cracks.rar file
1. I deleted all previous versions of Solidworks, including all folders
2. Disconnect from internet and disable anti virus program
3. Open the contents of the .iso and go to the sldim folder then go open the sldim application
4. Install the product with the serial number (I used the first one in the sw2010_SolidSQUAD file). If it says that you cant install it or you need to be connected to the internet just hit "Cancel" or "Okay" to continue and it should start the installation.
5. After its installed DO NOT START SOLIDWORKS!!!!!! I believe this will ruin the crack and you will have to reinstall it or only use the trial version.
6. Apply the cracks. Go to the folders that appeared after extracting the sw2k10sp0.0_cracks file. Open each folder and it has instructions where to put it. For Windows 7 x64 some of the directories you have to paste the cracks in are located at C:\Program Files (x86)\SolidWorks Corp and some are in C:\Program Files\SolidWorks Corp (See below for more details).For the Solidworks Folder crack it says you need to install it with a different serial. I didnt and it still worked, so if its not working maybe use that.

RedMan21 at 2011-01-23 02:26 CET:

Sorry I have no idea how to add or delete posts. Dont mean to spam. But this is the continuation of my second post (The one that has the 8th step)

Cracks location (this is what I did):
edrawings: C:\Program Files (x86)\SolidWorks Corp\SolidWorks eDrawings
Photoview: C:\Program Files (x86)\SolidWorks Corp\PhotoView 360
Solidworks: C:\Program Files\SolidWorks Corp\SolidWorks
Simulation: C:\Program Files\SolidWorks Corp\SolidWorks\Simulation\License\setup\i386
SW Explorer*: C:\Program Files\SolidWorks Corp\SolidWorks Explorer

*I think the SW Explorer should go in: C:\Program Files (x86)\SolidWorks Corp\SolidWorks Explorer\setup\i386
but the one I previously mentioned worked for me

If yours doesnt work Im sorry. I myself have gone through many Solidworks versions. It could just be your hardware or something you cant control. Try other versions, one should work.

BTW Windows 7 is only compatible with 2010 or newer unless you run it in xp compatibility mode or something tricky.

Good luck!

RajTech at 2011-02-10 02:09 CET:

hi guys this torrent is one of the best torrent have found and installed the crack and is working now.
so after days and days of finding the proper software to start with on solidworks platform this is the ultimate....have taken the pain to register here and thn confirm myself and log in JUST to let u guys knw who r having trouble here with the installation or the crack and most importantly the fav antivirus program sayin that the crack as a virus and the alarm bells goes off...lol
now i have followed the crack folder and found the certain folders and the files in them to be copy pasted and done with the crack,,,,,,it is a bit tedious but worth it. after successfully installing the software i saw the guy REDMAN21 has given a detail step by step working here and belive me he has made it easy just follow it ...
also a thank you to redman 21 for his concern for the guys of cad out here.... welll coming to two main points of this installation
first turn ur anitvirus to sleep for the time u did not finish with your complete crack installation
..........
secondly see to it u turn off the internet while installing it and whn it promts for internet just dnt care about it press ok or whtever except cancel and it should move on with installation.

any decent questions do ask plz..will try to help u guys there as this is a torrent worth it

voothai at 2011-02-22 04:44 CET:


I finally got flow simulation working.

Under VirtualBox 4.0.4 (Guest Additions installed).
Windows 7, 64 bit: http://thepiratebay.ee/torrent/5952557/Windows_7_Ultimate_(64_Bit)_x64_(November_2010)
64 bit version of SolidWorks from here.

What finally got it working for me was copying the license.dat to C:\Program Files (x86)\SolidWorks Corp\COSMOS M\License\ (thanks to Dan9111).
I then ran LicenseAdmin in that directory to verify it.

1) Mount 64 bit iso / burn and insert CD.
2) Run from iso/CD: \sldim\sldim.exe to install.
3) On the 3rd screen, click "Change" to change the products to be installed. A couple things will be unchecked (flow stuff and cosmos). Check everything! (thanks solidwok)
4) Finish install.
5) Copy crack (thanks RedMan21):
eDrawings: C:\Program Files (x86)\SolidWorks Corp\SolidWorks eDrawings\
PhotoView360: C:\Program Files (x86)\SolidWorks Corp\PhotoView 360\
Simulation: C:\Program Files (x86)\SolidWorks Corp\COSMOS M\License\

voothai at 2011-02-22 04:46 CET:


SolidWorks: C:\Program Files\SolidWorks Corp\SolidWorks\
SWExplorer: C:\Program Files (x86)\SolidWorks Corp\SolidWorks Explorer\SolidWorks Explorer 2010\ ? Didn't work.

6) Run C:\Program Files (x86)\SolidWorks Corp\COSMOS M\License\LicenseAdmin.exe
Verify "Authorization" = "Passed". This is required for flow simulation to work. If not, consider clicking "Configure License" or finding a license.dat elsewhere (I used the one included).

7) Run the SWExplorer crack... let me know if you get it to work.

RoHaa at 2011-03-05 20:16 CET:

because of the Next button:
method 2 has helped me

http://support.microsoft.com/kb/2506343

Skinns46 at 2011-03-06 18:00 CET:

Hi guys, I might be being a complete retard but I'm having no luck with this at all with windows 7. To start the .rar file opens with notepad and the .iso file (big and guessing it contains the installation) opens with windows disc image burner. Confused??
Any help would be much appreciated
Cheers

rychie at 2011-03-09 13:33 CET:

you just need to extract the .rar file and .iso file with winrar.. then you will be able to find the files described by redman 21 (his post is on pg 5) and continue with the installation.. so far its working for me!

JACKurSON at 2011-03-09 17:01 CET:

Please keep seeding people!!! thanks for the awesome upload - started download today...

anyone can help me? only downloading at 1.5kb's on 512k mweb uncapped line?

datbro at 2011-03-12 02:34 CET:

Ive installed this, but solidworks keeps crashing on launch saying that it couldnt load the .net framework. I tried installing the latest .net and rebooting, and it still fails.

any advice?

thehooter at 2011-03-13 19:21 CET:

I too have the error of running the SWExplorer patch which says "Error patching file!"
I tried both locations mentioned in the earlier posts, but unluckily haven't succeeded!!

Please help out...

ladiiyung at 2011-03-14 01:43 CET:

Works perfectly for me No problems at all thanks !
I am using the 32 Bit.

TPnils at 2011-03-16 15:15 CET:

my anti virus stopt 2 viruses in te crack, don't dwonload it

Trusted kingmahn at 2011-03-22 22:21 CET:

Works perfect. Fast seeders!

MacSolid at 2011-03-27 19:51 CET:

After downloading the torrent I can't seem to find the license file inside any of the crack folder. Specifically, I am looking for the license file inside the Simulation folder. Anyone knows how I may obtain the file? Thank you!

ign_cas at 2011-04-01 06:29 CET:

I am new to Pirate Bay and need this program for my engineering class. I have a question.

I downloaded this program and used WinRAR to extract sw2k10sp0.0_cracks. After I did that it gave me a new folder with the same name.

RedMan21 explains "Open the contents of the .iso and go to the sldim folder then go open the sldim application"

I dont really understand this. What is the .iso and the sldim folder? Do the have a certain name? Thanks guys I appreciate it.

ign_cas at 2011-04-01 06:31 CET:

I am new to Pirate Bay and need this program for my engineering class. I have a question.
I downloaded this program and used WinRAR to extract sw2k10sp0.0_cracks. After I did that it gave me a new folder with the same name.
RedMan21 explains "Open the contents of the .iso and go to the sldim folder then go open the sldim application"
I dont really understand this. What is the .iso and the sldim folder? Do the have a certain name? Thanks guys I appreciate it.

MacSolid at 2011-04-06 12:02 CET:

Could someone please post a working license file for simulation? Many thanks!

hahalolfailmupp at 2011-04-07 16:13 CET:

Wait, you are studying engineering, you need this software to study and you can't figure out how to install it? Or even how to find the necessary files?

I'd talk to your teacher and ask him/her if you can skip every engineering class until you have completed "Computer usage for beginners"

larahau at 2011-04-08 18:03 CET:

Is this a premium version?

Supra_Twin at 2011-04-23 02:12 CET:

IF anyone got Cosmos/Simulation to Work, Please post a Clear instruction on it. I keep getting error message saying "Please Validate your License" every time I click "Geo Star" And I did follow the Clear instruction!

designinthesky at 2011-04-25 19:42 CET:

REDMAN21 Thank You for the easy to follow instructions on installing Solidworks 2010.

I have only one error in making 100% of it work. Photoview 360 brings a pop up error message " !common:1299" and it does not pull up my files.

I used google but could not find a solution.
I am running Windows 7 64 bit.
I pasted the nexus 4.dll file into the corresponding folder...but my files do not show on photo360 at all...

Any help with this?

Thank you once more.

creaegenius at 2011-04-30 14:26 CET:

Hi guys just a quick question on the installation for this great upload.

I've installed Solidworks sucessfully but is confused on installing the add-ins.
1st how do you install the COSMOSFloworks if you need the serial key and if I'm on another planet can someone explain how to obtain this serial key so I can click "next" and install the add-ins.

Thanx

creaegenius at 2011-04-30 14:31 CET:

Hi guys, can't get add-ins to install.

I have installed solidworks successfully but is confused when trying to install solidworks COSMOSFloworks. The instructions say to "tick them all" when running silm, but where do you get the serial keys for the add ins so you can install.

Can someone please explain thanx

creaegenius at 2011-04-30 14:34 CET:

Sorry about the double posting, didn't realise it takes a while :(

Rarles at 2011-05-20 06:45 CET:

i torrented this yesterday, but cant seem to find the serial, what folder is it in?